<option id="wwwwu"><noscript id="wwwwu"></noscript></option>
  • <table id="wwwwu"></table>
  • 你好,歡迎光臨濟南誠德包裝制作有限公司網站!

    全國服務熱線:

    0531-88606457

    18764166456

    內頁輪播
    內頁輪播
    內頁輪播

    產品中心

    1. 方便袋
    2. 連卷袋/撕拉袋/拉鏈袋
    3. OPP塑料袋
    4. 平口袋/直立袋
    5. 手工異形袋/縮口塑料袋
    6. 扣手袋/手挽袋/服裝袋
    7. 罩衣袋
    8. 氣墊膜袋
    9. 塑料薄膜
    10. 抗靜電塑料袋
    咨詢熱線:

    0531-86954186

    當前位置:首頁>新聞資訊 >
    濟南自封袋熱封后翹曲怎么辦
    發布于:2021/03/12 濟南自封袋以聚乙烯(LDPE)和高壓線型聚乙烯(LLDPE)通過吹膜成型,熱切機制袋,制成的一種可以重復封口的塑料袋。自封袋可用于各種小型物品的內外包裝。用食品級的原料生產的自封袋可以存放各種小食品、茶葉,海產品等,防潮、防水、防蟲、防止東西散落。
    Jinan self sealing bag is made of LDPE and LLDPE by blow molding and hot cutting machine bag, which can be sealed repeatedly. Self sealing bag can be used for inner and outer packaging of various small items. The self sealing bag made of food grade raw materials can store all kinds of small food, tea, seafood, etc., moisture-proof, water-proof, insect proof and prevent things from scattering.
    濟南自封袋熱封后袋子出現翹曲的原因可能是復合膜的厚度不一致,熱封溫度過高或熱封時間過長,在縱向熱封刀部分,復合膜的運行軌跡不平直?;蛘呃鋮s與熟化時間不夠充分,表層基材薄膜耐熱性較差。復合過程中復合基材的張力匹配控制不當,導致濟南自封袋熟化定型后仍有殘余的應力,尤其是復合膜厚度較薄時更容易發生此類故障。
    濟南自封袋
    The reason for the warpage of Jinan self sealing bag after heat sealing may be that the thickness of the composite film is not consistent, the heat sealing temperature is too high or the heat sealing time is too long, and the running track of the composite film is not straight in the longitudinal heat sealing knife part. Or the cooling and curing time is not enough, the heat resistance of surface substrate film is poor. In the process of lamination, the tension matching of composite substrate is not well controlled, which leads to the residual stress of Jinan self sealing bag after curing, especially when the thickness of composite film is thin.
    要解決濟南自封袋翹曲的辦法也有很多??梢哉{整浮動輥張力,選用具有低溫熱封性的內封基材,將熱封溫度調整至適宜的溫度。要充分冷卻和熟化。重新選擇自封袋表層基材薄膜,調整復合加工設備各部分的張力,盡量使相復合的兩種基材回縮率相等。
    There are many ways to solve the warpage of self sealing bags in Jinan. It can adjust the tension of the floating roller, select the inner sealing substrate with low temperature heat sealing property, and adjust the heat sealing temperature to the appropriate temperature. Cooling and ripening should be sufficient. Re select the surface substrate film of the self sealing bag, adjust the tension of each part of the composite processing equipment, and try to make the shrinkage of the two composite substrates equal.
    上一篇:濟南復合袋出現的熱封該如何處理?
    下一篇:氣泡袋廠家解析常用作緩沖包裝的材料有哪些
    相關產品

    抗靜電塑料袋

    抗靜電塑料袋

    抗靜電塑料袋

    塑料薄膜

    相關新聞
    復合包裝袋組合標準的關鍵點
    自封袋手動封口的小妙招
    氣泡袋是怎么加工出來的?
    塑料袋在生活中的10種用途
    印刷膠帶脫膠的原因及解決辦法
    復合袋熱封不良的表現及其原因
    自封袋在使用過程中要注意的6個事項
    氣泡袋的儲存方法