<option id="wwwwu"><noscript id="wwwwu"></noscript></option>
  • <table id="wwwwu"></table>
  • 你好,歡迎光臨濟南誠德包裝制作有限公司網站!

    全國服務熱線:

    0531-88606457

    18764166456

    內頁輪播
    內頁輪播
    內頁輪播

    產品中心

    1. 方便袋
    2. 連卷袋/撕拉袋/拉鏈袋
    3. OPP塑料袋
    4. 平口袋/直立袋
    5. 手工異形袋/縮口塑料袋
    6. 扣手袋/手挽袋/服裝袋
    7. 罩衣袋
    8. 氣墊膜袋
    9. 塑料薄膜
    10. 抗靜電塑料袋
    咨詢熱線:

    0531-86954186

    當前位置:首頁>新聞資訊 >
    氣泡袋如何更好的保護產品!
    發布于:2020/02/27 氣泡袋的作用主要是保護產品在運輸過程中不受損害,但這并不僅僅表示只要將氣泡袋中就可以了,氣泡袋廠家應做好全套準備工作。
    The function of bubble bag is mainly to protect the product from damage during transportation, but this does not only mean that only the bubble bag can be included, and the manufacturer of bubble bag should make full preparations.
    1、應充分考慮物料或產品的特性采用合適的防護措施,防護措施的目的在于物料或產品在運輸、轉序、貯存時的安全性及延長產品質量的時效性;
    1. Proper protective measures shall be taken to fully consider the characteristics of materials or products. The purpose of protective measures is to ensure the safety of materials or products during transportation, sequence transfer and storage and to extend the timeliness of product quality;
    2、對于體積和重量較大的產品,如導軌、彈簧臂等產品,要特別注意包裝的強度,確保在流通中不受損傷;
    2. For products with large volume and weight, such as guide rail, spring arm and other products, pay special attention to the strength of packaging to ensure that they are not damaged in circulation;
    3、操作人員在包裝時必須采取戴工作手套或指套、輕拿輕放等措施,以保證物料或產品在運輸、運輸不受損傷;
    3. Operators must wear working gloves or finger cots, handle with care and other measures during packaging to ensure that materials or products are not damaged during transportation and transportation;
    濟南氣泡袋
    4、物料或產品裝入包裝后必須保持封閉狀態,可利用如膠帶、紡織帶、釘書機、封口機、打包機等材料或工具完成,封口必須牢靠;
    4. The materials or products must be kept closed after being packed, which can be completed with materials or tools such as tape, textile belt, stapler, sealer, packer, etc., and the sealing must be firm;
    5、所有包裝材料內外表面均要求清潔并不致產生碎屑、粉塵、污染物等;
    5. The internal and external surfaces of all packaging materials shall be clean and free from debris, dust, pollutants, etc;
    6、對易損、易震、易潮產品,應采取在包裝內加入抗震緩沖材料、干燥劑、防氧化劑等防護措施。
    6. For vulnerable, shock prone and damp prone products, anti-seismic buffer materials, desiccant, anti oxidant and other protective measures shall be added into the package.
    氣泡袋廠家在確認以上步驟都完成后,應在外包裝上有相應警示標識,如防倒置、怕濕、輕放等。
    After confirming that all the above steps have been completed, the bubble bag manufacturer shall have corresponding warning signs on the outer package, such as anti inversion, anti humidity, handle with care, etc.
    上一篇:你知道塑料的材質與性能嗎?
    下一篇:濟南自封袋適合放置的物品有哪些?
    相關產品

    抗靜電塑料袋

    抗靜電塑料袋

    抗靜電塑料袋

    塑料薄膜

    相關新聞
    復合包裝袋組合標準的關鍵點
    自封袋手動封口的小妙招
    氣泡袋是怎么加工出來的?
    塑料袋在生活中的10種用途
    印刷膠帶脫膠的原因及解決辦法
    復合袋熱封不良的表現及其原因
    自封袋在使用過程中要注意的6個事項
    氣泡袋的儲存方法